Automatic 40 Adc 3-Phase Winding Resistance Test Set
Automatic 40 Adc 3-Phase Winding Resistance Test Set — 2
Doble

Automatic 40 Adc 3-Phase Winding Resistance Test Set

الموديل: TRM-403

Automatic 40 Adc 3-Phase Winding Resistance Test Set with LTC Test, Auto Discharge and Demagnetization
اسأل عبر واتساب

التفاصيل والمواصفات

The TRM-403 is a three-phase transformer winding resistance meter that allows the user to connect all test cables to the transformer bushings. The unit will then measure the transformer resistance value for each of the phases without the need to disconnect and reconnect cables for each phase. The TRM-403 can provide a fast and stable reading of very large transformers by utilizing a 60Vdc power supply. It is capable of outputting a selectable test current from 1A to 40A. Since the TRM-403 can accurately measure resistance from 1 micro-ohm to 500 Ohms, it can be used as a micro-ohm meter to measure EHV circuit breaker contact resistance, or for any low resistance measuring application.


  1. Perform three phase test on a transformer without the need to switch cables
  2. Can provide individual Delta winding resistance values
  3. Can provide individual Wye (with no neutral) winding resistance values
  4. Demagnetize transformer after test
  5. Selectable test current from 1A to 40A
  6. Computer control via RS-232C, USB, or Bluetooth interface
  7. Built-in 2.5″ wide thermal printer



YPEPortable transformer winding resistance meter
PHYSICAL SPECIFICATIONS21” W x 17” H x 9” D (53 cm x 43 cm x 24 cm); Weight: 35 lbs (15.8Kg)
OPERATING VOLTAGE100 – 240 Vac, 50/60 Hz
RESISTANCE READING RANGE1 micro-ohm to 500 Ohms
ACCURACY1 – 19,999 micro-ohms: ±0.5% reading, ±1 count20 – 999 milliohms: ±1% reading, ±1 count1 – 500 Ohms: ±1.5% reading, ±1 count
TEST CURRENT1-40A in 1A increments
TEST VOLTAGE60 Vdc charging, 18V DC max during measurement
INPUT CHANNELS4 input channels for measuring resistance
DISPLAYBack-lit LCD (128 x 64 pixels), viewable in direct sunlight and low light levels
PRINTERBuilt-in 2.5″ wide thermal printer
INTERNAL DATA STORAGE256 static test records (each can contain up to 111 readings) and 120 dynamic test records
EXTERNAL DATA STORAGEUp to 999 test records on external USB Flash drive.
COMPUTER INTERFACESRS-232C, USB, Bluetooth
SAFETYDesigned to meet UL 61010A-1 and Can/CSA C22.2 No 1010.1092 standards
ENVIRONMENTOperating: -10ºC to 50ºC (15ºF to +122ºF)Storage: (-30ºC to 70ºC (-22ºF to +158ºF)
HUMIDITY (MAX)90% RH @ 40˚ C (104˚ F) non-condensing
ALTITUDE (MAX)2000m (6562 ft) to full safety specifications
CABLESFour 50-foot test cables, one LTC control cable, one ground cable, one power cord, one USB cable
OPTIONSShipping Case
WARRANTYOne year on parts and labor
Specifications are valid at nominal voltage and ambient temperature of +25˚C (+77˚F).


منتجات مشابهة

تقييمات العملاء

لا توجد تقييمات بعد.